- MaterialMetal
- ManoMano ReferenceME72998521
- Warranty2 years
- Product codeM3-X028-20230426-12150-CJ
Features: This is a fan that uses thermal energy as an energy source to circulate the hot air produced by a wood-burning fireplace. There is a thermoelectric module on the fan which acts as a small generator and drives the fan motor. When this generator module experiences a thermal difference between the upper and lower surfaces, it generates an electric current. The lower fan heats the bottom of the module while the top of the module is kept cool by the upper fan fins. No batteries or electricity are required, meaning it absorbs heat to spin the fan, blowing hot air through the firebox directly into the living room, increasing internal space for the air circulation and improves the heating capacity of the oven. The fan speed varies according to the temperature of the wood stove. The higher the oven temperature, the faster the speed. When the temperature of the stove is so low that the fire has gone out, slow down until it stops.
Product Benefits: To save fuel, the fan draws heat away from the stove to improve energy efficiency; Auto-generate – separate or disconnected to connect to battery; Quiet operation; Automatic start, speed regulation, stop; Simple and elegant design. Place the stove fan on the smooth surface of the stove near the side or back of the chimney. The oven fan is specially designed for freestanding ovens with a hearth surface temperature between 65 and 350 C). Temperatures above this range can damage the fan and generator and will void your warranty.
Specification Product Name: Fireplace Fan
Material: Aluminum Oxide
Air volume: 180- 210
p>
Blades: 5 leaf
Wind speed: 1100 rpm
Noise: 35 dB
Operating temperature: 60 -350°C
p>
Battery: none
Scope of delivery: 1x fireplace fan
















Reviews
There are no reviews yet.