SUNHEAT Mirrorstone 700W – Far Infrared Panel Heater – Suspended Ceiling – Wall Mount Heater – Slim Panel Heater [Energy Class A++]

• The 700W Classic Infrared Heating Panel is a brilliant way to heat your home, and to make some savings on your heating bills.
• It measures just 1200mm x 600mm, and it’s just 22mm deep, meaning it sits almost flush to the wall!
• It’s IP54 rated, which means it can handle splashes of water comfortably, so it’s easy to clean with a damp cloth.
• There won’t be any stuffiness, as this heats objects not air, so there’s no cold spots or dust circulation

 Heat your home for less with the ultra-discreet heating solution that is infrared heating. The 700W Classic Infrared Heating Panel brings so much to both your interior design, and how much you’re spending on your heating bills. Measuring 595mm by 1195mm, this heating has a 700W power that can heat an area of around 11-12m².

The panel is made fromPremium FIR Coating , which gives it a great appearance and a sturdy feel. It can reach temperatures of around 115˚C, although you can place it high up on the wall or ceiling out of reach. It has an IP54 rating, so is protected against splashes of water. This makes it easy to clean with a damp cloth.

Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.

If you wish to ceiling mount your IR Panel, you will need to purchase a Suspension Kit alongside it. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.

This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.

Please note that quoted heating area is based on optimum conditions.

Infrared Heating: What’s it All About?

It’s all about a method of heating your home that saves money and energy and looks great doing it. Infrared heater works by firing infrared beams around your room, which bounce off of the objects in there, leaving them warm. A conventional heater warms the air, which causes convectional currents, where the warm air rises, cools, and falls again, requiring heat again.

As well as being inefficient, this can also promote mould growth, cold spots, and dust circulation. As infrared heating does not do this, it can be much better for your health. The heat that infrared heaters provide is clean, dry, and non-stuffy.

Infrared heating is completly safe, as the beams used are of the same kind that TV remote controls produce. In fact, it’s the same heat that the sun provides, but without any harmful UV radiation. It’s not just better than conventional central heating, either; it’s cheaper, too! Infrared heating can actually save you around 60% on your heating bills!

FIR Coating For Maximum Efficiency & Safety

Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200^oC without yellowing over time.

Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.

To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.

These infrared panels are not difficult to install, either. There’s absolutely no complicated electric or plumbing work needed, so forget about calling any professional help in.

These heaters are completely plug-and-play compatible, with the extent of the electric work being to plug it into the mains.

To fit it onto your wall or ceiling is simple, too. We provide a stencil guide in the box for you, so all you have to do is draw through the holes on the stencil, then drill into the wall where you drew.

From there, it’s as simple as slipping the screws into the wall, and hanging the panel neatly on them.

You’ll be up and running within minutes, and it’s all completely a do-it-yourself task.

Discreet Heat That Looks Neat

The clean white finish is exemplary, and brilliant for hiding your panel away in plain sight.

Place it in a kitchen or bathroom, where splashes of water won’t matter, and you can get extra heat for less.

Plus, it means you won’t lose floor/wall space to a clunky radiator, or an inefficient portable heater that gets in the way.

At just 22mm in depth, it can easily be mounted flush to the wall or ceiling, out of reach, and out of the way.

Their ability to be mounted on the ceiling is all down to how they work. As they heat the objects in the room with penetrative beams, there’s no warm air to rise, so objects at the bottom of the room still get plenty of heat.

Thanks to the gorgeous glossy white front, it’s simple to just wipe clean with a damp cloth. That’s the extent of all the maintenance you’ll need to carry out on the panel, as it simply doesn’t require any.

Whereas a boiler will need servicing and repairs throughout its lifetime, these panels have no moving parts, and so maintenance is not needed. They also have a lifespan of approximately 30 years of usage, so there’s no need to worry about that, either.

On the rear is a standard 240v junction box, with 1.5m of heavy-duty flex cable, and a standard UK 3-pin plug. If you want to make your heater portable, you could purchase one of our infrared panel stands for a more flexible heater.