Wall Mounted Heater, 500W Heater With LED Display, Wall Mounted Candle, Electric Heater With Adjustable Thermostat And Timer, Small Laptop Heater For Bedroom, Bathroom, Office

• Portable Compact Folder: The 4.34 x 2.96 x 7.09 inch heater doesn’t take up much space and is useful for those who want direct personal warmth. The compact and lightweight heater can be used in any room in your home or workplace. The main thing you need to do is connect it to your favorite space.
• Digital Thermostat: Unlike most space heaters, they only have options for low, and high media, ours can not only choose precise degrees, but also keep it for as long as you want. Ability to be adjustable for desired temperature from 15(60°F)-25.6  °F (90°F) (Celsius panel display).
• Timer Function: The programmable space heater for indoor use is designed with a timer function of 1-12 hours in 1 hour increments. Just press the “Timer” button to adjust the desired time.
• Low Energy Consumption: The portable electric heater operates at a low wattage of 500 watts, it won’t overload the circuit, perfect for small spaces. Quickly heat any room with 30% less energy than ordinary heater. The air heater is smaller than the normal heater which makes you warm and comfortable, while saving your time and energy.
• Safety Protection: Designed with ceramic element safe inside and cold outside. The space heater will automatically shut off if the temperature overheats. Overheating protection prevents accidents or damage. Turn off the heater when held. 180° rotatable mouthpiece

1. Power supply AC220-240V, 50Hz/60HZ

2. Turn on the power, heat up, and the fan will run, and work for 12 hours by default without pressing any button;

span>

3. Press the time key to switch to the timing setting,

4. The initial display temperature is 20 degrees Celsius, press the up and down keys to set the temperature, the range is 15~32 degrees Celsius ;Time setting under time setting 1~12 hours;

5. Press the fan button to switch between high (HH) and low (LL) fan speeds;

6. When the set temperature is reached, the heating is cut off, the fan continues to work for 60 seconds and then stops, the screen displays OF, low Reheat at set temperature -1;

7. When the time is reached (if not set, the default is 12 hours), the heating is cut off, and the fan continues to work for 60 seconds After stopping, the screen displays OF;

8. After finishing the work, press any key to restart the work (if no timer is set, the default is 12 hours)< /span>

9. If there is a “natural wind” function, press and hold the “+-” button for three seconds to start it, and display CC ;Continue to press and hold the “+-” key for three seconds to turn off, and display the setting before “Natural Wind” starts